ActionTrax Traction Boards

The Metal Tooth Version features 72 pre-installed metal "teeth". Our standard Teeth ActionTrax can be modified yourself if you wear down teeth or have us do the work and provide the hardware with this ready to go extreme version. Metal teeth provide a much greater "grab" on the tire and do not wear down like polymer teeth do with wheel spin. We use US made 1/4" 20 TPI x 3/4" galvanized steel bolts with washers and nylock nuts. Beware: For Heavy Duty and Extreme Use ONLY. Metal Teeth can damage standard tires if you spin your wheels. For Experienced Users and Extreme Use ONLY.

100% Made In America. Improved design with input from elite military units and winning Baja 1000 racers. Featuring a sawtooth end for better material clearing capabilities. Quick link system to make temporary roads with whatever cording or flex-cuffs may already be in your kit. Pre formed drill bit alignment holes on the bottom of each tooth to allow for easy repair with easy to source standard hardware. Larger hand holds for gloves and big hands. Improved material composition and UV Stabilizer. Designed to be multi-purpose and allow you to repair burnt teeth in the field. All materials and labor are 100% US Sourced.

Single Wumbo Bar

This Single Wumbo Bar crossbar is used on the back of all of our Roof Racks. You can purchase an extra Single Wumbo Bar for your roof rack to add spots to mount brackets, lights, or even antennas

Specs

• 200lbs center load with only 1/16'' deflection 
• Avaliable in 48" , 50" and  53"
• Hardware for mounting the bar to the rack is included

Double T-Slot XTR Extrusion Bar

This Double XTR Bar crossbar from Xtrusion Overland is used on the back of all of our Roof Racks. You can purchase an extra Double XTR Bar for your roof rack to add spots to mount brackets, lights, or even antennas Our proprietary profile makes it stronger than the average bar, while keeping it even lighter even than the previous WUMBO bar. It is still compatible with all 8020 style bars in the 1530 series, with 8mm slots. 

*NOTE: This is an updated version from the previous "WUMBO" bar from AL OFFROAD. They are 100% compatible except these don't Opening Slots. You need to use Drop-In T-Nuts (check our new "WUMBO Nuts"). This is a superior method as you don't need to get to the access slots anymore. Just drop the nut in the t-slot!

Specs

• 400lbs center load with only 1/16'' deflection 
• Avaliable in 48" , 50" and  53"
• Hardware for mounting the bar to the rack is included

Awning Brackets

  Our awning brackets will be a great addition to your roof rack. Allowing mounting to a wide majority of awnings

• Awning Brackets
• Hardware included for installation on our roof racks
• Sold in pairs
• Powder coated

AL Offroad Wumbo Crossbars (GFC Camper

The AL Offroad Wumbo GFC Crossbars are sold individually

 Specs

• Crossbar Dimensions 1 1/2" x 3" x 53"
• mounting brackets and hardware included for installation
• AL Offroad Wumbo Crossbars (1)

Ensure you're ready for your next adventure or campout with our antenna mount for you to have communication with others on the trail

• Stainless Steel Hardware
• Our design allows for a low profile look while still being able to mount most antennas
• Fits 1" x 2" Crossbars
• Available in a GMRS Kit at (Click Here)

GMRS T-slot Antenna Mount Combo

This T-slot Antenna Mount Combo kit includes

•1 Antenna for GMRS Radios

• Our T-slot Antenna Mount Combo for easy mounting onto the top of any double Roof Rack Crossbar

•1 Cable

•Mounting Hardware

AL Offroad Rack Hook Point

This Rack Hook Point mount helps add an extra hook point if needed on a certain place of your Roof Rack!

This Rack Hook Point mount includes

• Rack Hook Point
• Hardware needed for installation on our roof racks
• Sold in Pairs 

AL Offroad Wumbo Nuts

These T-nuts are an easy way to mount your accessories to the crossbars. These specific T-nuts fit into our Bigger crossbars for our FJ Cruiser, 4th & 5th Gen 4Runner racks.

All of our hardware is stainless steel so no need to worry about rust.

     Included With Track Nuts

• 16 Track Nuts (New Drop-In Style)
• 16 Buttonhead Screws 

     Mounting Brackets

• Awning Mounts
• Antenna Mounts
• Traction Board Mounts

AL Offroad Tent Mounts

Our Tent Mounts will be a great addition to your roof rack. Allowing mounting to a wide majority of Roof Top Tents

• Stainless Steel Hardware
• Sold in pairs
• Brackets are powder coated

AL Offroad Rack Handle Light Brackets

This Rack Handle Light allows you to light up the sides of your vehicle easily without any drastic modification.

This Rack Hook Point mount includes

• (2) AL Offroad Rack Handle Light Brackets with optional lighting 
• Hardware needed for installation on our roof racks
• Sold in Pairs 
• Compatible with Rigid Industries Rock Lights 

AL Offroad Super Low Awning Brackets

Our Super Low awning brackets will be a great addition to your roof rack. Made specifically for roof racks with roof top tents, Allowing mounting to a wide majority of awnings

• Awning Brackets
• Hardware included for installation on our roof racks
• Sold in pairs
• Powder coated

AL Offroad Roof Rack Accessory Panel

Looking for a great option for securing/mounting accessories to your Roof rack. Best for mounting Traction Boards, Rotopax and Storage boxes.

- Includes mounting hardware for our Roof Racks

- Made from 3/16” Aluminum 

- Powder Coated