Decked Drawers Decked Drawers Decked Drawers

FEATURES

ITS ALL IN THE DETAILS

•  

  HIGH DENSITY POLYETHYLENE

  Impervious to extreme UV light and temperatures. Born for harsh environments.

•  

  STEEL SUBFRAME

  Galvanized steel skeleton in-molded to HDPE = Unmatched strength-to-weight ratio of 10:1.

•  

  FITS LIKE A GLOVE

  Custom shaped to fit your bed. No loss of usable space.

•  

  AMMO CAN STORAGE

  Extra compartments by the wheel-wells to maximize your storage options.

•  

  HANDLE

  So easy to operate, even a bear could do it... with gloves on.

•  

  WHEELS

  Urethane, sealed bearing drawer wheels. Roll. Like. Butter.

•  

  RULER & BOTTLE OPENER

  Handy fine finishes because we care. Treated with robust corrosion inhibitors.

•  

  ZERO TO MINIMAL DRILLING

  J-hooks attach to bed tie downs. Easy to assemble, install or remove.

•  

  RECYCLED MATERIALS

  Made from 100% recycled HDPE and recycled American Steel.

Full bed-length drawers and side access pass-throughs to the wheel wells offer massive, customizable storage. Almost zero wasted space. Exactly 100% increase in the utility of your truck bed. Full-size standard drawers extend 12" further and Full-size short drawers extend 1" further.

High impact resistant polymer resin co-molded to a steel subframe gives you a true 2000lb payload letting you load 'er up and get 'er done.

Out of sight and out of mind. With your tailgate locked, drawers are inaccessible. Add an optional keyed lockset for complete peace of mind.

From Acts of God to carwashes to anything falling from the sky, your tools and gear stay safe and dry.

Keeps dust and other airborne particulate matter out of your drawers using a protective series of closeout panels so your stuff stays clean and cozy.

Accessories included with the purchase of this Drawer System:

• 1x Sixer 16
• 1x Halfrack 32
• 2x Drawer Dividers
• 1x Drawerganizer
• 4x Stash Bins
• 4x D-Ring Tie Downs

Maximize your storage, efficiency, and organization with the Crossbox. Fits all our Drawer and Tool Box Systems.

The Crossbox is an integrated, modular storage toolbox designed to complement the functional organization of DECKED drawers. It's designed to fit crosswise in all full-size drawers and midsize wide drawers; it fits lengthwise in narrow midsize drawers. The Crossbox is available in DECKED Blue and also in a military-approved Desert Tan. Made 100% in America. Mix and match to grab and go! Fitted with an EPDM lid gasket for weatherproof storage, the Crossbox features an easy carry handle, a removable small tool and parts organizer tray, and multiple grip points for easy retrieval from system drawers. The Crossbox is rugged, durable and meant to take a beating.

FEATURES:

• High impact resin and heavy duty construction offer lasting durability
• Integrated EPDM seal keeps moisture out
• Removable small parts and tool tray
• Easy locking latches
• Lockable to keep contents secure
• Ergonomic carry handle
• Grip points located on ends for easy retrieval from drawers
• Integrated lid ruler
• Ruler & Common Bolt/Bit Guide
• Made in USA

FITMENT:

• Nests in DECKED Drawer Systems and Tool Boxes
• Fits narrow, midsize drawers lengthwise; fits wide, midsize and full-size drawers crosswise
• Half the size of D-Box

DIMENSIONS:

• 17.5" x 10.75" x 7.75"
• 672 cubic Inches
• 40lb weight limit

 Keep expensive tools, rods, and gear locked in your Drawers or Stash Bins, out of harm's way. A locking tailgate combined with the steel subframe of the Drawer System and Drawer System Locks will keep the bad guys out - more secure than a locked tonneau cover or canopy.

• Comes in packs of two, three, and six
• Fits all DECKED Drawer Systems (Does not fit legacy systems)
• Does NOT fit DECKED Tool Box
• Lock works for both Drawers and Stash Bins
• Unique, custom key for each pack of locks

Gladiator Decked Drawer Systems

ITS ALL IN THE DETAILS

• 
  

  HIGH DENSITY POLYETHYLENE

  Impervious to extreme UV light and temperatures. Born for harsh environments.

• 
  

  STEEL SUBFRAME

  Galvanized steel skeleton in-molded to HDPE = Unmatched strength-to-weight ratio of 10:1.

• 
  

  FITS LIKE A GLOVE

  Custom shaped to fit your bed. No loss of usable space.

• 
  

  AMMO CAN STORAGE

  Extra compartments by the wheel-wells to maximize your storage options.

• 
  

  HANDLE

  So easy to operate, even a bear could do it... with gloves on.

• 
  

  WHEELS

  Urethane, sealed bearing drawer wheels. Roll. Like. Butter.

• 
  

  RULER & BOTTLE OPENER

  Handy fine finishes because we care. Treated with robust corrosion inhibitors.

• 
  

  ZERO TO MINIMAL DRILLING

  J-hooks attach to bed tie downs. Easy to assemble, install or remove.

• 
  

  RECYCLED MATERIALS

  Made from 100% recycled HDPE and recycled American Steel.

Ford Decked Drawer Systems

ITS ALL IN THE DETAILS

• 
  

  HIGH DENSITY POLYETHYLENE

  Impervious to extreme UV light and temperatures. Born for harsh environments.

• 
  

  STEEL SUBFRAME

  Galvanized steel skeleton in-molded to HDPE = Unmatched strength-to-weight ratio of 10:1.

• 
  

  FITS LIKE A GLOVE

  Custom shaped to fit your bed. No loss of usable space.

• 
  

  AMMO CAN STORAGE

  Extra compartments by the wheel-wells to maximize your storage options.

• 
  

  HANDLE

  So easy to operate, even a bear could do it... with gloves on.

• 
  

  WHEELS

  Urethane, sealed bearing drawer wheels. Roll. Like. Butter.

• 
  

  RULER & BOTTLE OPENER

  Handy fine finishes because we care. Treated with robust corrosion inhibitors.

• 
  

  ZERO TO MINIMAL DRILLING

  J-hooks attach to bed tie downs. Easy to assemble, install or remove.

• 
  

  RECYCLED MATERIALS

  Made from 100% recycled HDPE and recycled American Steel.