46 inches of traction. 3 inches of leveling. 9 inches wide. Self-feeding design.
Made in the USA
Lifetime Warranty
Free Returns
GoTreads are a unique, patented automotive tool designed to provide the traction needed to get vehicles going again when stuck in snow, mud, or sand.
GoTreads were designed around one word – simple. It stores in small places. It can be put into position in a matter of seconds – no tools, no assembly, no attaching to the tire required.
The smooth finish of the tool allows the snow and mud to shake off for easy cleaning. GoTreads are made of flexible, high strength, high impact polypropylene copolymer with special additives to give this durable plastic even greater toughness. Yet with all this strength, it weighs only 5.8 pounds.
46 inches of traction.
3 inches of leveling.
9 inches wide.
For the best performance, use one GoTreads tool per driving wheel on your vehicle. If you plan to off-road in 4×4, two GoTreads are typically enough used under the 2 tires spinning the most.
Pair of GoTreads with a custom cube carrying case.
46 inches of traction. 3 inches of leveling. 9 inches wide. Self-feeding design.
GoTreads are a unique, patented automotive tool designed to provide the traction needed to get vehicles going again when stuck in snow, mud, or sand.
GoTreads were designed around one word – simple. It stores in small places. It can be put into position in a matter of seconds – no tools, no assembly, no attaching to the tire required.
The smooth finish of the tool allows the snow and mud to shake off for easy cleaning. GoTreads are made of flexible, high strength, high impact polypropylene copolymer with special additives to give this durable plastic even greater toughness. Yet with all this strength, it weighs only 5.8 pounds.
46 inches of traction.
3 inches of leveling.
9 inches wide.
Note: On smaller vehicles like cars and minivans, typically only one GoTreads tool is needed in most situations. However, we do recommend having 2 available in case more than one wheel gets stuck. For the best performance, use one GoTreads tool per driving wheel on your vehicle. If you plan to off-road, two GoTreads is yourbest option.
This bundle includes a Custom, USA made carrying case for GoTreads for less! Buy them together and save 33% on the case.
The GoTreads Cube Case will hold two standard length GoTreads in a compact space. Each bag is made in the USA. It is a great way to carry and transport GoTreads between vehicles or to keep the inside of your rig clean when GoTreads are dirty.
Custom, USA made carrying case for GoTreads. The GoTreads Cube Case will hold two standard length GoTreads in a compact space. Each bag is custom-made the USA. A great way to carry and transport GoTreads between vehicles or to keep the inside of your rig clean when GoTreads are dirty.
Comes in two sizes. Standard will fit a pair of our three panel GoTreads. XL will fit a pair of our XL four panel GoTreads.
A single mini GoTread for adventure motorcycles and other small tires.
40.75 inches of traction and 5.75 inches wide. Self-feeding design.
Our smaller version of GoTreads, called, MotoTreads or MiniTreads, are great traction mats for adventure bikes. A single, compact traction device for adventure motorcycles, or vehicles with small tires. They work for wheelchairs, lawn mowers, ATVs and other small tires that get stuck.
When you need more length on your GoTreads, you can use this kit to connect two separate GoTreads together.
Made in the USA
Lifetime Warranty
Free Returns
When you need more length on your GoTreads, you can use this kit to quickly connect two separate GoTreads together. Works on both the standard and XL size. No tools are required to double the length of your GoTreads by connecting them end to end. Use one quick connect kit per pair of GoTreads.
Easy to use instructions
Line the hinge of the quick connect kit up with the first GoTreads you are connecting.
Note: GoTreads hinges are keyed, so they can not be installed incorrectly.
Slide a quick connect pin down through the holes. Repeat with second GoTread.
After you are done using, grab the curved ends of the quick connect pins to remove.
Kit includes one hinge piece with two quick-connect pins.
A GoTreads storage bag with flexible stowage options and multiple uses.
When loading your rig, having options to stow your gear is essential. We found that sometimes we needed to lay our GoTreads flat, and other times we wanted them standing up. Either way, they needed to carry conveniently, and make the contents easy to deploy and repack. The TreadPack™ is a truly unique solution.
While this bag was engineered to accommodate a set of GoTreads, it is also excellent for storing other gear as well – recovery straps, soft shackles, tire chains, etc.
It also functions as a superb winch line dampener. Truly a multi-functional tool.
Pair of GoTreads XL with a custom XL cube carrying case.
Pair of GoTreads XL with a custom XL cube carrying case.
58 inches of traction. 4 inches of leveling. 9 inches wide. Self-feeding design.
Made in the USA
Lifetime Warranty
Free Returns
GoTreads is a unique, patented automotive tool designed to provide the traction needed to get vehicles going again when stuck in snow, mud, or sand. The 4 panel version offers one extra panel than our standard version for situations when you need more length. GoTreads XL provided an extra 12″ of traction and 1″ of leveling. Sold in pairs.
58 inches of traction.
4 inches of leveling.
9 inches wide.
For vehicles with larger tires (33″ diameter +) or those more often in extreme terrain conditions. The XL variant provides an extra foot of traction surface beneficial in these scenarios.
GoTreads were designed around one word – simple. It stores in small places. It can be put into position in a matter of seconds – no tools, no assembly, no attaching to the tire required.
The smooth finish of the tool allows the snow and mud to shake off for easy cleaning. GoTreads are made of flexible, high strength, high impact polypropylene copolymer with special additives to give this durable plastic even greater toughness. Yet with all this strength, it weighs only 7.2 pounds.
This bundle includes a Custom, USA made carrying case for GoTreads XL for less! Buy them together and save 33% on the case.
The GoTreads Cube Case XL will hold two XL length GoTreads in a compact space. Each bag is custom-made in the USA. A great way to carry and transport GoTreads between vehicles or to keep the inside of your rig clean when GoTreads are dirty.
