Fit kit adapters for quick release mounts

Specialty roof top tent mounting hardware for adapting the quick release mounts to specific roof top tent brands.

Description

Do I need a fit kit?

Fit kits are only required for roof top tents that have “non-standard” frame rails. Please see the pictures below for what a standard frame rail looks like. A fit kit is required because some tent models are built with unique frame rail extrusions. To function correctly, we need one side of your mounts to slide open and close in the tent frame rail.

If your roof top tent mounting hardware looks like the photos below, you DO NOT need a fit kit.

If you do not need a fit kit, double check that you have 8x standard roof top tent mount plates (shown above) with your tent. These mount plates should have been included with your tent’s purchase, these will be required. We offer an option for you to purchase a set of slider plates if needed.

If you purchase a fit kit then the new adapters will replace the standard mount plates. 

Stainless steel roof top tent lock designed for the Vanultra quick release mounts. 1/2-inch locking pin to be used in place of clevis pin for added security. 

Single Lock Pack:

- (1) 1/2" x1-7/8" Pin Locks

Two Lock Pack (keyed alike):

-(2) 1/2" x1-7/8" Pin Locks

THE PROBLEM – Thieves steal roof top tents

Roof top tents are a pricey investment, but they enable adventure, exploration and special experiences with loved ones.  Sadly, thieves seek to benefit from the fruits of your hard work. RTT’s are stolen from vehicles and resold on used marketplaces. Without serial numbers and traceability, recovering from a loss will result in many phone calls with your car insurance agent for a settlement.

THE SOLUTION – Vanultra Locking Roof Top Tent Mount

Be proactive, not reactive. Prevent thieves from stealing your fun, force them to move on and keep away from your vehicle with the security and protection offered by Vanultra.

Product key benefits:

• Investment Protection – Retain the assets that you have worked hard for
• Parking – Park in the city or at the trailhead with confidence
• Freedom – Don’t let worry get the best of you, live in the moment without theft concerns

Product key features:

• Protection – bolt cutter protection provided by the spacer assembly
• Rust Free – corrosion resistant materials – stainless steel and aluminum construction
• Low profile – no height added to tent
• Compatible with most racks – round, tubular, rectangular and brand specific load bars
• Strength – edge flange supports the base mount and prevents it from bending into an arc
• Fit – direct fit for most roof top tents

1x Stainless steel base locking mount
1x Stainless steel cover plate
2x Aluminum telescoping spacer assemblies
1x Tubular Push Lock with 2 keys
1x Stainless steel hardware kit

Frequently Asked Questions

Yes, if you have 2.5″ or more of clearance between the roof and bottom of your roof rack then it will fit. Fits cross bars up to 4.3″ width and 2.0″ thick
No, if you have less than 2.5″ between the roof and the bottom of your roof rack. With less than 2.5″, there won’t be enough room to install the bottom cover plate.

One locking roof top tent mount will prevent an unauthorized removal of your tent. However, redundancy may help add an additional level of security if desired. If you wish to send the message, “keep on walking”, a second locking mount may be added. 

Yes, if you order more than one mount, the locks will be keyed alike. We highly suggest that you save your key number if you’re ever in need of a copy.

4 Pack

Tent On, Hassle Off – Quickly and easily install and remove your roof top tent from your vehicle with the help of Vanultra’s Quick Release Mounts. Return your vehicle from camper to daily driver in seconds and enjoy the benefits of improved fuel mileage, handling, and garage parking without the hassle.

THE PROBLEM – Roof top tents need to be removed regularly

Roof top tents are time consuming and difficult to remove especially with low profile roof racks. Roof top tents need to be removed to:

• Improve your fuel mileage
• Improve your vehicle handling
• Enable garage parking
• Use automatic car washes
• Drive through access
• Install other roof rack accessories (kayaks, mountain bikes, etc.)
• Prevent tampering of the tent

THE SOLUTION – Vanultra Roof Top Tent Mounts

Product key features:

• Quick Release / Disconnect
• Low profile – no height added to the tent
• Compatible with most racks – round tubular, rectangular and brand specific cross bars
• Drop and drive install – tent alignment is set once with the fixed side of the mount
• No tools required after initial install
• Locking feature with 1/2″ hitch pins (sold separately)

Need a Fit Kit? View the list of Confirmed Compatible Tents

Fits rectangular racks or cross bars within these sizes:

Fits round tube racks or cross bars within these sizes:

Popular compatible rack brands include: